The working oil temperature of the ultra-high pressure electric hydraulic pump ranges from 10 degrees Celsius to 50 degrees Celsius. Bearings are usually cleaned once every six months, and lubricating grease needs to be added during assembly. Before starting the ultra-high pressure electric hydraulic pump, it is necessary to open the air release nut and place the switch in the unloading position. If the motor temperature is found to be too high during use, it should be stopped. Cool it down before use. The pump has been adjusted before leaving the factory, and the bearings are usually cleaned once every six months. Lubricating grease needs to be added when assembling the ultra-high pressure electric hydraulic pump. The electric oil pump system consists of a three-phase asynchronous motor, a high-pressure oil pump, an oil tank, and other components to form an ultra-high pressure oil pump. It has the advantages of small size, low pressure and high pressure, light weight, simple structure, and easy use. In order to observe pressure changes during operation at any time, the pump is equipped with a backup interface for pressure gauges, which can be used by users to install pressure gauges.

This pump can be used as a hydraulic pump for various hydraulic instruments. Do not speak too loudly at will. When readjusting, it is necessary to use a pressure gauge. This pump can be used as a hydraulic pump for various hydraulic instruments. After being equipped with other hydraulic tools, the ultra-high pressure electric hydraulic pump can perform various tasks such as lifting, molding, bending, straightening, shearing, assembly, and disassembly. Ultra high pressure electric hydraulic pump reduces labor intensity and improves work efficiency. When using, the air release nut should be opened, the switch on the oil collection block should be turned on, and the power supply should be plugged in. The ultra-high pressure electric hydraulic pump system consists of a three-phase asynchronous motor, a high-pressure oil pump, an oil tank, etc. It has the advantages of small size, low pressure and high pressure, light weight, simple structure, and easy use. In order to observe pressure changes during operation at any time, the pump is equipped with a backup interface for pressure gauges, which can be used by users to install pressure gauges.

Turn on the switch to unload, wait for the hydraulic oil to return, remove the quick connector sleeve, tighten the air release nut, remove the solenoid, and turn off the switch of the ultra-high pressure electric hydraulic pump. The oil pump uses No. 20 engine oil. The oil storage capacity of the ultra-high pressure electric hydraulic pump must be within the range above the oil window. The ultra-high pressure electric hydraulic pump must be filtered with an oil filter mesh of 80 or more when refueling and changing oil, and the oil tank must be cleaned before replacement. The oil change period is six months. Ultra high pressure electric hydraulic pump and put the quick connector on the quick head of the matching hydraulic equipment. Press the power switch and wait for the motor to rotate for 1-2 minutes. Turn off the switch and place it in the boosting state. At this time, the output hydraulic oil will perform various tasks, and the output hydraulic oil will increase in pressure on its own with the increase of load until it reaches 63MPA. After the operation of the ultra-high pressure electric hydraulic pump is completed. The high-pressure oil pipe enters the factory and undergoes a 105MPA test.